200/Tones- hydraulic electrically-cum-hand operated, with 3 pressure gauges 0-200 tones, 0-100 tones, and 0-50 tones capacity complete with Flexure…
It is for the determination of the aggregate impact value and has been designed in accordance with IS-2386 (Part…
For determination of the workability of concrete provided the nominal maximum size of the aggregate does not exceed 38 mm. This…
For the measurement of the resistance to plastic flow of cylindrical specimens of bituminous pouring mixture loaded on the lateral surface.…
determining asphalt-cut bitumen, and blown-type bitumen. It consists of a bath thermostatically controlled with inlet and outlet taps. Fixed and movable…
Proper compaction of cement concrete while casting specimens for compression testing is desirable to achieve a better and more consistent mixture.…
Buoyancy Balance helps in determining the specific gravity and for the water absorption of the aggregate. It is fitted…
As per IS-516-Steel cube Mould 2.78 (7.06 cm) for vibrating machine complete with base
plate.
-Cast Iron Cube Moulds complete…
Confirming to ISS-7320. This apparatus is used for the determination of the workability of concrete where the nominal size of the…
IS: 2386 (Part I)For determining the elongation index of coarse aggregate. It consists of a steel plate on which 8 steel…
IS:2386 For determining the flakiness index of aggregate. It consists of a panel having accurately cut slots of different standard lengths…
Vibrator is mounted over coiled springs. Vibrations are by means of a revolving shaft with an eccentric. Frequency 12000±400 vibration per…
For determination of resistance to wear of coarse aggregate by abrasion. A rolled steel drum totally closed except for removable dust-tight…
-ASTM D-2172.AASHO T-58, T-164. For the determination of Bitumen percentage in Bituminous mixtures. It has a removable precision machined aluminum rotor…
Meets the requirements of IS 2720 Part V and consists of a brass bowl held on a rubber of standard hardness…
IS-2720 (Part VII) It consist of a compaction Mould 100 mm DIA. X 127.3 mm height X 1000 cc volume complete…
For quick determination of moisture content of materials in powder from i.e. soil sand, coal, pottery, ganister, cement, etc. A weighed…
This is for determining the shear strength of both remolded and undisturbed soils. It consists of a torque head adjustable in…
Are specially designed for Laboratory Purposes and are controlled by means of three heat-rotating switches. Complete with plug pin, cord suitable…
Consists of both end open cylinder, a base plate, a plunger hand leand tamping rod.7.5 cm
diam. for 2 mm…
Sieves 20 cm dia are fabricated out of spun brass, without a joint frame, double folded bottom, having to bead at…
